Centerline vs. Shouldered Set-Ups
Centerline set-ups are typically recommended for cut-to-length lines or slitting lines that include a leveler.
For almost all other slitting applications using a shouldered set-up will reap the highest productivity and operating cost savings from tighter set-ups, longer equipment life and reduced set-up time.
Consider these benefits to shouldered set-up:
- Straighter wound coils result from less deflection at the uncoiler,
slitter, recoiler and over-arm separator
- Longer uncoiler and recoiler bearing life
- Reduces uncoiler set-up time since coil positioning/measurement
are eliminated
- Presets inboard side guides saving time typically spent on positioning
side guides on a centerline set-up.
- Reduces accumulated tolerances from slitter spacers and over-arm
separator
- Longer knife and stripper life because knife clearance is consistent
- Eliminates the need for edge control on straight wound coils
- Requires less edge trim so more metal can be slit with less
waste
- Extends the life of the uncoiler guides since traversing the
uncoiler is no longer necessary
- Eliminates the need for expensive outboard supports on the uncoiler and recoiler.